Axiom Supply Lifetime Warranty Wheel Bearing Assembly Toyota Tundra / Sequoia 2022 - 2026

Fitment

This premium front wheel hub and bearing assembly fits 2022–2026 Toyota Tundra 4WD trucks and 2023–2026 Toyota Sequoia 4WD SUVs. It installs on the front driver or passenger side and features a 36-spline 4WD hub, integrated ABS encoder, 6x139.7 wheel bolt pattern, and M14x1.5 wheel studs.

This assembly is designed specifically for four-wheel-drive models. It does not fit 2WD or rear-wheel-drive applications.

Toyota Tundra

2022–2026 Toyota Tundra 4WD

Toyota Sequoia

2023–2026 Toyota Sequoia 4WD

Features

Precision Tapered Roller Bearings – Engineered with high-performance grease for smooth operation, reduced friction, and long service life.

Premium Hardware – Heavy-duty cold-formed, corrosion-resistant wheel studs provide exceptional strength and durability for demanding truck and SUV applications.

Integrated ABS Encoder – Designed to provide accurate wheel-speed signal transmission while maintaining dependable performance in heat, mud, moisture, and harsh driving conditions.

4WD Splined Hub Design – Features a 36-spline center opening designed to accept the front CV axle shaft on compatible four-wheel-drive models.

6-Lug Configuration – Features a 6x139.7 wheel bolt pattern with six M14x1.5 wheel studs.

Heavy-Duty Hub Construction – Built to handle the increased loads associated with towing, oversized tires, lifted suspension systems, off-road driving, and demanding everyday use.

Description

The Axiom Supply AX515222 Front Wheel Bearing and Hub Assembly is engineered specifically for the latest-generation Toyota Tundra and Sequoia 4WD platform.

Developed with Axiom Supply's proprietary bearing and hub structure, this assembly is designed to reduce friction and hub-face deflection under load, delivering tighter steering response, improved braking stability, and enhanced durability in demanding driving conditions.

Our advanced tapered roller bearing design, optimized internal preload, and proprietary high-performance grease work together to reduce operating friction and heat while providing the strength required for heavy-duty truck and SUV applications.

Each assembly comes as a complete preassembled bolt-in unit and installs on either the front driver or passenger side.

Whether your Toyota is used for towing, daily driving, oversized tires, lifted suspension, or off-road use, Axiom Supply bearing assemblies deliver the strength, precision, and longevity serious truck owners demand.

Includes

(1) Front Wheel Bearing and Hub Assembly

(6) Preinstalled M14x1.5 Wheel Studs

Specifications

Position: Front Driver or Passenger Side

Drive Type: 4WD

Wheel Bolt Pattern: 6x139.7 mm

Wheel Stud Quantity: 6

Wheel Stud Thread: M14x1.5

Axle Spline Count: 36

Hub Mounting Holes: 4

ABS: Integrated ABS encoder / wheel-speed sensing system

Installation Notes

This is a direct-replacement bolt-in hub and bearing assembly designed for the factory front steering knuckle and CV axle configuration.

Clean all mating surfaces thoroughly before installation and verify that the axle splines, steering knuckle, and mounting surfaces are free from corrosion or damage.

Always follow Toyota's vehicle-specific installation procedure and torque specifications for the exact model year and configuration being serviced.

Installation Guide Here

Interchange

Toyota OE 43550-0C010

MOOG 515222

Timken HA590985

GSP 690056HA

Axiom Supply AX515222

The Axiom No-Nonsense Lifetime Warranty

Axiom Supply bearing assemblies are warrantied for life to the original purchaser against manufacturer defects, premature wear, or breakage.

Push it to the limit—we don’t care.
If the part lets you down, we will make it up to you!